Laterally, try several methods, if you are still facing an issue with your Rockspace extender. Then don’t worry we are here only for you. On this page, we will tell you only one method to fix the extender issue. After doing this method you will need to do the login and configuration process again.

Reset Rockspace Extender

Table of Contents

Through two ways you can easily reset your Rockspace extender device.

By Pushing The Reset Button.
Via Navigation

By Reset Button:

First, look for the reset hole button which is located at the back side of the Rockspace extender. Now, push that button for 8 to 10 seconds with the help of a paper clip. Next, all the extender LEDs will turn off. Hence it means your extender device is completely reset.

If your device is now reset completely, follow another method.

By Search Engine:

First, take a WiFi gadget and connect it to the Rockspace extender network. Now, open the web browser and enter re.rockspace.local web gateway. After that, the Rockspace web management page will be open on your display. Next, look for an administration option and then hit on the reset. Further doing this, your Rockspace WiFi range extender device is now completely reset.

How To Verify My Rockspace Extender Device Is Completely Reset?

After doing the factory reset process of the Rockspace extender, check the lower things.

All the LEDs of the Rockspace extender LED will turn off.
On your WiFi network list, the extender network is no longer.
The Rockspace_EXT will show up once you reconfigure it.

Execute Rockspace Extender Login Process

There are two methods to do the Rockspace extender login process.

Through RS application.
Through navigation

By RS Application:

First, on your Android mobile phone Launch the Google Play store. If you are having an iOS device then open the Apple App Store.
Now, look for the RS application and download that application on your android mobile phone.
Next, open the app and fill in all the credentials which are shown on the display.
In case you don’t know the credentials then check the tag or bottom of your Rockspace extender device.
Hence, your Rockspace extender login process is completely done.

By Web Browser- Sign-in To Rockspace Extender:

First, connect your WiFi gadget such as a computer to the Rockspace extender network with the help of an ethernet wire.
Now, open the web browser on that WiFi-containing gadget and enter re.rockspace.local web gateway in the URL bar.
Next, fill in all the details which are shown on the Rockspace web management page.
Further doing all the above steps the Rockspace extender login process is successfully done.

Configure Rockspace Extender

There are two methods to do the Rockspace extender installation process.

Through WiFi Protected setup.
Via search engine.

By 1st Method: WPS Method

Note: Before starting this method, make sure your host router must support the WPS button. If it does not support this button then don’t waste your time on this method. Try another method.

Place the Rockspace extender power plug in a wall socket near the host router.
After that, make sure your extender must be located closer to the host router.
Now, press the WPS buttons on the extender and router.
Next, the solid WPS LED starts blinking on both gadgets.
Hence, it means the Rockspace AC1200 setup process is done.

By 2nd Method: Through Navigation

First, connect your WiFi gadget to the Rockspace WiFi range extender network. (By ethernet cable). After that, open chrome and write the default web gateway re.rockspace.local in the location bar. Now, go to the WiFi network list and select the SSID that you want to extend. Fill in the correct password. In the end, wait for a few minutes to see the extended successfully connected message on your display. Therefore, it means the Rockspace AC1200 setup process is completely done after trying this method.

Additional Tips

Note: With the help of this method, your Rockspace extender issue is solved. If not then try the few lower additional tips.

Change Rockspace Extender Placement:

Due to the wrong placement of the rockspace extender device, you can face issues. To fix this issue, a halfway location between your house and office is best. Also, make sure your extender does not place near metal or electronic appliances such as microwaves, fridges, etc. All such types of appliances absorb the WiFi signal which comes from the extender and router device.

Improve Extender Software:

Due to the outdated firmware of the Rockspace WiFi range extender device, you can face issues. To upgrade extender firmware/software follow the lower steps.

For this, visit the extender web management page by entering the web portal in the navigation location bar. Now, look for an administration option and then find a software upgrade option. After that, wait for a short while to download the latest firmware file on your laptop or your computer. Hence, the firmware of your Rockspace extender device is now successfully improved.

With the help of this page, you will learn the reset and Rockspace AC1200 setup process of an extender device. Also, learn advanced troubleshooting tips to fix extender issues.