The dual-band wireless range extender from Wavlink can gradually enhance your wireless network. Because of its extremely practical and compact design, installation is a breeze. Due to its sophisticated appearance, it can be simple to incorporate into the interior of your home or place of business.
Wavlink AC1200 extender setup using manual method
Steps for Wavlink AC1200 Extender Setup:
This extender’s installation procedure is very simple and provides more than three options. The Wavlink AC1200 Extender Setup with AP will now be examined. a detailed setup process.
- Join the power converter to a nearby outlet.
- Make sure the insulation is appropriate on all cables.
- To make sure the extension is on, look for a solid blue light on it.
- The extender and router must now be connected.
- To do this, concurrently hit the WPS buttons on your router and extender.
- The devices won’t connect if you don’t do it in two minutes.
- The signal LED has gone back to being a solid blue colour.
- This shows that the two devices have been effectively connected.
- The following step in configuring your Wavlink ac1200 is now accessible.
- The extender will strengthen the network once it is located. Additionally, both the standard and extended networks will use the same SSID and password.
- Because of this, all you have to do to begin is log in with your current password.
Troubleshooting steps
- Users of some IP 192.168.10.1 gateways are banned from using the WPS button by default. If you are unable to connect using the WPS button, you can set up your extender using the setup managerial website of your extender.
- Make sure your wireless router is near where you have installed your extension. If not, your network upgrade will function quite differently. For best performance, you ought to be at least one metre away from your router.
- Away from any electronic interference devices, place your extension. Avoid using things like Bluetooth devices, cordless phones, microwaves, and baby monitors.
Note: If you need any assistance regarding your wavlink ac1200 wifi range extender so contact our technician or visit the official website that is ap.setup.
Wavlink AC1200 Extender Setup by via the web browser
- Your Wavlink AC1200 Extender must be connected to a power source.
- Wait until the outgrowth’s power LED has completely turned green before placing it close to the router.
- To begin the repeating mode, press the button on the left side of your Extender.
- Once the lights are stable, wait.
- Look for the Wavlink wifi network there by going to the WiFi settings on your device.
- Open a web browser such as Safari or Chrome after signing up for the Wavlink network.
- In the top URL field, type 192.168.10.1, ap. set up, or wifi.wavlink.com.
- Next, type “admin” twice on the Login screen—once for the username and once for the password.
- an effective hit. Please fill out the form.